Now that your home bar or man cave possesses its own kegerator to cool and dispense that frothy beer you love a great deal, it might be wise to get acquainted with a few of the important elements of your kegerator. One of the most basic parts of your kegerator is definitely the keg coupler.

Just what the Keg Coupler Does? Think of the keg coupler as being a “key” and also the valve of the keg since the “lock”. They cannot work without having each other. The keg coupler attaches to the device and also to a Carbon dioxide compressed gas line. It enables the compressed air to get in the keg and drive out the beer.

sankey connector

Due to most of these elements cooperating, you get a flawlessly chilled and tasty draft dark beer inside the convenience your home.

Types of Keg Couplers – This is when it receives a little bit more difficult. Depending on which kind of dark beer style you might have in your kegerator, you may need to have a various form of coupler in order to serve it correctly.

To find the correct coupler for your home use, you must know the manufacturer/type of dark beer you serve, know where it was made and/or the dimensions of keg it is actually in. The reason being there are six several types of keg couplers. Right here is a fast rundown from the different types of industrial keg couplers.

D Coupler – Suits U.S. Sankey Keg Valves

A Coupler – Suits Most German Keg Valves

G Coupler – Fits Some European Keg Valves

M Coupler – Suits Some German Keg Valves

S Coupler – Fits European Sankey Keg Valves

You Coupler – Fits Some European Keg Valves

In order to your beer to become offered correctly, it must have to hold the correct form of coupler that fits the device around the keg. The sort of coupler you need depends on in which that particular dark beer was kegged.

For instance, the American Sankey “D” System coupler is definitely the most popular. It suits all household brand name kegs, as well as 95Percent of United states beers. If that is actually all you are thinking about drinking from your kegerator, then this is the coupler you ought to select.

In case you have questions concerning which kind of keg coupler you will need, it might be smart to contact the local supplier, the shop from where you bought your keg or perhaps even the brewery alone. For fast reference on the most famous beers, please reference our handy list of keg couplers needed for different brands of dark beer.

How you can Install Your Keg Coupler

To set up your keg coupler for your kegerator, you need to initially attach the CO2 regulator to the Carbon dioxide tube. Make sure that the cylinder is filled and also the valve is shut. Then, safely pair in the regulator towards the CO2 tube. Affix the gas line to the “gas out” port around the regulator and secure in position with a clamp. Then, attach another finish from the gas line towards the “gas in” dock around the coupler. Following, attach the beer line towards the fluid out dock on the coupler.

Now, you are prepared to get in touch the coupler to the keg. Be sure that the CO2 tube vale is within the “off” position as well as the draw handle from the coupler is within the diagonal/upper place. Find the locking throat in the kegerator, and turn the coupler clockwise 25°. Then, take out on the handle, drive it down to the keg device and release the handle. This will lock the coupler in ejqnby and securely affix it for the kegerator.

With the coupler attached to the keg, gradually activate the CO2 tube. At this particular point, you will hear gasoline moving through the CO2 cylinder and regulator through the keg coupler and into the keg. Pull around the pressure relief device to enable gas to vent and provide you with a precise reading in the stress gauge, then calibrate the regulator for the suggested serving stress to your beer. You are now prepared to serve your very own draft beer.

Sankey Connector – Useful Points..